To obtain a controlled and reduced size in the shredding process can be used two ways:
- a primary 2 shaft shredder coupled with a secondary shredder
- a 3 or 4 shaft shredder with selection grid
In the first case, you may have a high capacity and a very controlled size, but is necessary to consider the price of two shredders. In the second case the flow is reduced to the advantage of size and in any case it is necessary to evaluate the cost of a 3 shaft shredder.
SatrindTech provides a solution that allows to combine the controlled size content with the lower cost of a 2 shaft shredder, without the need for a secondary passage: the patented CL System (system to counter-blades).
The principle of operation is based on a special cleaning sector front blade that accompanies and forces the material towards the grid below the blade. The material will be ejected from the shredding chamber with a width defined by the thickness of the blade and the width of the hole grid. Are possible combinations of the thickness of the blade and the shape of the hole grid, which affect flow rate and size in a different way.
The CL System is suitable particularly on materials such as plastic, including automotive components, metal containers and chip-ferrous metals, pharmaceutical and hospital waste, textile waste. Watch the video !
The CL System is applicable to our shredders with increasing powers from 10 to 300 HP.
Leave a comment or contact our Sales Department for any further information about 2 shaft shredder with CL System